What is the material of ozone filter

Author : trustifiltor

Update time : 2022-09-13 15:40:20

What is the material of the ozone decomposition filter? What's black on the screen, activated carbon or some other catalyst?

Regarding the material of the ozone filter，Classification by substrate:

● Aluminum honeycomb, the activated carbon containing the catalyst, evenly coated on the surface of aluminum honeycomb;

● polyurethane sponge (after antioxidant treatment); The activated carbon containing or catalyst is uniformly attached to the silk diameter of the sponge;

● activated carbon (carbon block or cylindrical carbon) will be activated carbon block or particle loaded with catalyst, sintering at high temperature;

● Ceramics, the special catalyst ceramics, after many times on the catalyst and high temperature sintering;

● Non-woven fabrics, the activated carbon loaded with catalyst evenly coated on non-woven fabrics;

Besides,the black color on the screen is activated carbon loaded with catalyst.

In a word, the Principle:

In the air system mixed with O3, the O3 be decomposed to O2 rapidly at the room temperature, while the ozone hits the filter surface coated with catalyst, the extra energy not be needed in whole action process.

Step1： O3 + M → M-O + O2
Step2： M-O + O3 → M + 2O2

Previous : What are the dangers of ozone to human body?

Next : What Is About Ozone Filter

what is a safe ozone level

Mar .15.2023

The US UL867 safety standard for ozone is ≤0.05PPM, and the EU standard is formulated with reference to the US standard. my country's standard GB simply says that UL867 means that under laboratory conditions (temperature 25°C, humidity 50%), the cumulative concentration produced by any ozone source cannot exceed 0.05PPM.

what is the catalyst for the decomposition of ozone to oxygen

Mar .07.2023

Ozone destruction catalyst usually be manganese oxide , rare earth, and so on.Among them, manganese oxide is the most widely used catalyst. It can oxidize harmful ozone into oxygen at room temperature.

Ozone safety testing for air purifiers

Dec .26.2022

At present, many air purifier manufacturers and testing institutions have not conducted ozone safety testing of air purifiers in accordance with the above-mentioned national mandatory standards.The percentage of ozone concentration should not exceed 5×10-6. (Note, no more than 0.05ppm. About 0.1mg/m3)

Health hazards of ozone pollution in the door

Dec .26.2022

The COVID-19 pandemic has brought heightened attention to air quality indoor . People are thinking about how these invisible virus particles can spread indoors. However, the hazards of the indoor environment are not just the virus that causes the epidemic. According to WHO, air pollution is the world's greatest environmental health threat. Many people have always believed that ozone in the air is a double-edged sword. It has the side of sterilizing and inactivating viruses, but also has the side of endangering human health. Modern research suggests that ozone in indoor air has risen to be one of the most important pollutants.

Visit us

3rd F,Building M, Nanshui Industrial Area,Sanjiao Town, Zhongshan City,Guangdong, China

Call us

Fax : 0086 760 28213218
Telephone : 0086 18688898087

[email protected]

Lisa

Leave a message